I rebuilt the board last weekend and I'm not happy

@greer.shepard · 2026-05-19T23:28:45.111+00:00

Tore the whole thing down Saturday because I just swapped a Strat for a '60s Tele Custom and the board I had dialed for the Strat sounded wrong with the Tele. Same room, same amp, different guitar, and the room sounds wrong now. Here's what changed: the Strat liked the boost in front, the Tele wants it in the loop. The Strat liked a slight chorus on cleans, the Tele wants none. And the reverb amount that was perfect on the Strat is suddenly washing out the Tele's high end. So I rebuilt: pulled the chorus, moved the boost to the loop, dropped the reverb mix from 35 to 20. Played for two hours last night. Still doesn't sound right. The Tele has this honk in the upper mids that the Strat didn't, and now nothing on the board addresses it. Considering a parametric mid-cut, considering a different amp, considering selling the Tele. I'm posting because I know someone in here is going to tell me 'the answer is the amp not the board'. Tell me the answer is the board. I just rebuilt the board.

JR
@jules.rourke7 weeks ago
The answer is the amp. A Tele honk in the upper mids is a speaker issue or a preamp issue, the board can mask it but the board can't fix it. You need to either swap the speaker or pull the EQ on the amp's tone stack. I had this exact problem with a Ricky into an AC30. Solved it with a Celestion Blue instead of a Greenback. Sorry.
LF
@lo.flannery7 weeks ago
Don't sell the Tele. The honk you're describing is a 1.5kHz peak and every Tele Custom has it. Find a pedal with a parametric mid and notch it out around there. I use a Source Audio EQ2 on session dates specifically for this. Live with the Tele's honk for a week before you spend money. You might learn to like it.

I rebuilt the board last weekend and I'm not happy

4 replies

Your reply